Physical plant additions required 4,000 tons more cooling, but the school was determined to minimize wastewater and save energy.

Original article at ACHR News “Evaporative cooling — direct, indirect, and two-stage solutions — are being used across the board in a wide variety of commercial and industrial solutions,” said Randy Niederer, director of marketing, Cambridge Engineering. “It is currently experiencing a renaissance, as large manufacturing and distribution facilities are choosing this technology to provide cooling relief for employees.” This renaissance, along with several new technology factors, creates a backdrop for contractors to benefit from the sale of evaporative cooling solutions. EVAPORATIVE SALES

For decades now, evaporative cooling has been the principal means to regulate the temperature of buildings. And with more than 50% of total building water usage dedicated to heat transfer, there are major opportunities for water savings. Enter EVAPCO, a manufacturing company focused on heat transfer applications and a world leader in designing and manufacturing evaporative cooling products. I spoke with Dustin Cohick, Product Manager at EVAPCO, and Josh Boehner, Marketing Applications Engineer, to learn more about heat transfer and how EVAPCO’s technology can save water. Read the interview

EVAPCO, Inc. has announced, effective Monday, May 6, 2019, prices will increase for the following products: Cooling Towers, Closed Circuit Coolers, Options and Accessories, eco-Air Series of Dry and Adiabatic Units, Evaporative Condensers, Evapcold, Replacement Parts, Evaporators, CPA Systems, SSTP Penthouse Evaporators, EDF Make-Up Air Units, RVS Products, Ice Coils and Water Systems The average increase is 3%. Contact an EVAPCO Marketing Engineer for additional information.

EVAPCO has introduced the newest addition to its ESW single-cell, closed-circuit evaporative cooler line, the 14-foot by 22-foot “Big Box” ESW4 – now with up to 40 percent higher capacity than the 12-foot by 18-foot ESWB. The ESW4 is offered in more than 130 models with capacities of 270 to 670 nominal tons, and with fan motor sizes of 20 to 100 HP. The new ESW4 was designed to provide optimal capacity and energy efficiency available from the manufacturer’s single, largest closed-circuit cooler cell. With its cross cool internal tube configuration and patented Sensi-Coil elliptical tube design

EVAPCO’s AT Atlas counterflow cooling towers – now in larger sizes – are designed in large, preassembled modules for ease of rigging and installation. As the most energy efficient modular cooling tower on the market, the AT Atlas is unmatched in CTI-certified capacity per cell. Atlas series cooling towers range in capacity from 1,484 to 2,386 nominal tons per cell, providing up to 60 percent more cooling capacity per cell, while requiring up to 40 percent less fan power per ton of cooling compared to traditional factory assembled cooling towers. Available in Type 304 or Type 316 stainless

Recently, The News featured EVAPCO's Water Saver in their publication. See it in the What's New section . Find information on the device that improves water efficiency by increasing operating cycles of concentration, which reduces blowdown and the use of treatment chemicals on our Water Saver page .

EVAPCO’s commitment to providing 100% fully-rated equipment led to the development and execution of an extensive adiabatic pad test program, the results of which are contained in the research paper, Adiabatic Fluid Coolers & Refrigerant Condensers: Impact of Pad System Design on Saturation Efficiency and Unit Operation . The contents of this paper are being presented at the February 2019 CTI Conference. This research paper is provided as a valuable resource to help become educated on adiabatic pad saturation efficiencies and their impact on fluid cooler and condenser sizing. EVAPCO discovered

EVAPCO is an industry leading manufacturing company that provides a host of solutions globally in the field of heat transfer applications, with products that service the commercial HVAC, industrial refrigeration, power generation and industrial processing sectors. Having successfully delivered installations in the region over the years, EVAPCO's track record in the Middle East is enviable. Its new office, which opened recently here in Dubai, is aimed at providing enhanced infrastructure and advisory support to clients in terms of installing units and aftersales services. Jelle Wagelmans, Sales

EVAPCO, Inc. has announced the hiring of the R. F. Peck Company, Inc., as the exclusive EVAPCO representative in the Syracuse and Rochester, NY areas. They also continue to represent EVAPCO in Albany, NY. “I’m excited to extend the responsibilities and reach of R. F. Peck Company,” said Jamie Facius, vice president of EVAPCO North America sales. “Their expertise in our technology, and its application, and their familiarity with these key New York markets, will greatly strengthen our exposure there.“ “We enjoy a great working relationship with R. F. Peck Company, and have confidence that this